Results 1 to 10 of 10

Topic: CronusMAX PLUS - How to Authorize Xbox One Controllers

  1. #1
    Forum Admin

    User Info Menu

    Thumbs up CronusMAX PLUS - How to Authorize Xbox One Controllers

    New video updated to show the removal of controller batteries


  2. #2
    Babyfaced Assassin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    my controller didnt Authorize
    i did the same in the video...

  3. #3
    Forum Admin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    Downgrade to FW 1.44 and run the CronusMAX PLUS Upgrade again

    To downgrade - http://cronusmax.com/forums/showthread.php?t=146933

    And to upgrade/install Cronus PRO - http://cronusmax.com/forums/showthread.php?t=146931

    Then try again - make sure the micro USB cable is good (test with Cronus PRO Device Monitor)

  4. #4
    Forum Admin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    Any luck ?

  5. #5
    Babyfaced Assassin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    so i do that but no luck....
    in device monitor can is see the controller but when i hit the button it doesn´t work.
    i changed on 3 controller (original xbox one controller) and 3 micro usb cable.
    what can i do i want to play with my arcade fightstick from the 360

  6. #6
    Babyfaced Assassin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    any idea what can i do ???

  7. #7
    Forum Admin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    The only thing if its not a faulty unit is that you haven't upgraded the CM correctly to CronusMAX PLUS or its a bad micro usb cable.

    If you think it's faulty follow the returns procedure with whomever you purchased from and get a replacement.

  8. #8
    Forum Admin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    New video updated to show the removal of controller batteries

  9. #9
    Babyfaced Assassin

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    Great! Super helpful

  10. #10
    My Other Ride Is a Yoshi

    User Info Menu

    Re: CronusMAX PLUS - How to Authorize Xbox One Controllers

    Hi all,
    just bought CM+ and have a hard time to authentize it on the pc. i put Output to xb360 - unpluged it from the PCPROG and entered it via the Output to the PC. as stated it will wait for the Controller (indicated by the idle box and the lower dot). once I plug in the elite Controller to CM it rumples once and nothing else happens - no matter how Long i wait or which usb port i use. any help welcome!!!

    Thanks a lot

    Ben

    [Port9] : Xbox Elite Controller

    Is Port User Connectable: yes
    Is Port Debug Capable: no
    Companion Port Number: 22
    Companion Hub Symbolic Link Name: USB#ROOT_HUB30#4&462b03&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
    Protocols Supported:
    USB 1.1: yes
    USB 2.0: yes
    USB 3.0: no
    Device Power State: PowerDeviceD0
    ---===>Device Information<===---
    English product name: "Controller"
    ConnectionStatus:
    Current Config Value: 0x01 -> Device Bus Speed: Full (is not SuperSpeed or higher capable)
    Device Address: 0x13
    Open Pipes: 2
    ===>Device Descriptor<===
    bLength: 0x12
    bDescriptorType: 0x01
    bcdUSB: 0x0200
    bDeviceClass: 0xFF -> This is a Vendor Specific Device
    bDeviceSubClass: 0x47
    *!*ERROR: bDeviceSubClass of 71 is invalid
    bDeviceProtocol: 0xD0
    bMaxPacketSize0: 0x40 = (64) Bytes
    idVendor: 0x045E = Microsoft Corporation
    idProduct: 0x02E3
    bcdDevice: 0x0203
    iManufacturer: 0x01
    English (United States) "Microsoft"
    iProduct: 0x02
    English (United States) "Controller"
    iSerialNumber: 0x03
    English (United States) "7EED85BFC4E9"
    bNumConfigurations: 0x01
    ---===>Open Pipes<===---
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
    bmAttributes: 0x03 -> Interrupt Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x04
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
    bmAttributes: 0x03 -> Interrupt Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x04
    ---===>Full Configuration Descriptor<===---
    ===>Configuration Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x02
    wTotalLength: 0x0060 -> Validated
    bNumInterfaces: 0x03
    bConfigurationValue: 0x01
    iConfiguration: 0x00
    bmAttributes: 0xA0 -> Bus Powered
    -> Remote Wakeup
    MaxPower: 0xFA = 500 mA
    ===>Interface Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x04
    bInterfaceNumber: 0x00
    bAlternateSetting: 0x00
    bNumEndpoints: 0x02
    bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
    bInterfaceSubClass: 0x47
    bInterfaceProtocol: 0xD0
    iInterface: 0x00
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x01 -> Direction: OUT - EndpointID: 1
    bmAttributes: 0x03 -> Interrupt Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x04
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x81 -> Direction: IN - EndpointID: 1
    bmAttributes: 0x03 -> Interrupt Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x04
    ===>Interface Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x04
    bInterfaceNumber: 0x01
    bAlternateSetting: 0x00
    bNumEndpoints: 0x00
    bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
    bInterfaceSubClass: 0x47
    bInterfaceProtocol: 0xD0
    iInterface: 0x00
    ===>Interface Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x04
    bInterfaceNumber: 0x01
    bAlternateSetting: 0x01
    bNumEndpoints: 0x02
    bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
    bInterfaceSubClass: 0x47
    bInterfaceProtocol: 0xD0
    iInterface: 0x00
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x02 -> Direction: OUT - EndpointID: 2
    bmAttributes: 0x01 -> Isochronous Transfer Type, Synchronization Type = No Synchronization, Usage Type = Data Endpoint
    wMaxPacketSize: 0x00E4 = 0xE4 bytes
    bInterval: 0x01
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x82 -> Direction: IN - EndpointID: 2
    bmAttributes: 0x01 -> Isochronous Transfer Type, Synchronization Type = No Synchronization, Usage Type = Data Endpoint
    wMaxPacketSize: 0x00E4 = 0xE4 bytes
    bInterval: 0x01
    ===>Interface Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x04
    bInterfaceNumber: 0x02
    bAlternateSetting: 0x00
    bNumEndpoints: 0x00
    bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
    bInterfaceSubClass: 0x47
    bInterfaceProtocol: 0xD0
    iInterface: 0x00
    ===>Interface Descriptor<===
    bLength: 0x09
    bDescriptorType: 0x04
    bInterfaceNumber: 0x02
    bAlternateSetting: 0x01
    bNumEndpoints: 0x02
    bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
    bInterfaceSubClass: 0x47
    bInterfaceProtocol: 0xD0
    iInterface: 0x00
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x03 -> Direction: OUT - EndpointID: 3
    bmAttributes: 0x02 -> Bulk Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x00
    ===>Endpoint Descriptor<===
    bLength: 0x07
    bDescriptorType: 0x05
    bEndpointAddress: 0x83 -> Direction: IN - EndpointID: 3
    bmAttributes: 0x02 -> Bulk Transfer Type
    wMaxPacketSize: 0x0040 = 0x40 bytes
    bInterval: 0x00

Similar Topics

  1. Headset ,2 controllers, Xbox One and CronusMax - It works.
    By xTACKSx in forum CronusMAX PLUS Official Guides
    Replies: 74
    Last Post: 2 Days Ago, 04:58
  2. [XBOX 360] CronusMAX PLUS - How to Authorize Xbox 360 Controllers
    By MaxADMIN in forum CronusMAX PLUS Official Guides
    Replies: 0
    Last Post: 11th April 15, 14:43
  3. [XBOX 360] XBox360 wired GameStop Controller will not authorize through CronusMax
    By CarstenPH in forum CronusMAX PLUS Hardware Support
    Replies: 5
    Last Post: 31st August 14, 08:55
  4. CronusMAX won't Authorize my Xbox One Controller now? HELPPPPP (Fixed)
    By BklynMark in forum CronusMAX PLUS Hardware Support
    Replies: 5
    Last Post: 14th January 14, 00:09

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •