Results 1 to 30 of 42

Topic: PS4 Disconnecting? FOLLOW THIS GUIDE

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Forum Admin

    User Info Menu

    Thumbs up PS4 Disconnecting? FOLLOW THIS GUIDE

    Does your PS4 timeout or randomly disconnect? Your DualShock 4 is probably still paired to your PS4 and not authorizing correctly through the CronusMAX and/or USB Hub.

    This happens when users turn the PS4 console on with the DualShock 4 controller or accidentally power up the controller before connecting it to the USB Hub > CronusMAX.

    Basically, the DualShock 4 is still wirelessly paired to the console from when it was previously being used - so of course the data from the controller is not passing through the USB hub via USB cable. All you need to do is unpair the controller fully from the PS4.

    Here's a simple video showing exactley what you need to do (Thanks to @GL0ZZ3N):

    The step by step instructions:

    First make sure your Cronus PRO software is the latest version (at least 1.20) - there have been a large number of fixes since the last release.

    Connect your DS4 controller to a CronusMAX with a micro USB cable - then connect the CronusMAX to the PS4 and power on using the console's power button.

    On the PS4, go to: Settings > Devices > Bluetooth Devices > then select the controller > Press the Options Button > Forget Device

    There is also a reset button on the back of newer model controllers that will remove all paired settings and set it to factory default status. (You still need to do the above).

    1. Turn off the PlayStation 4.
    2. Locate the small reset button on the back of the DualShock 4 near the L2 shoulder button.
    3. Use a small, unfolded paper-clip or something similar to push the button (the button is inside a tiny hole). Hold the button down for a couple of seconds and release.

    If you are using a PS4 PRO console and a DualShock V2 (CUH-ZCT2U) you will also need to go into the settings and tell your controller to work over USB only and also to disable the controller's power saving settings. This is a mandatory procedure.

    Now go through the steps again of connecting the DS4 to the USB Hub as the Authorization controller (or as a wired controller with USB Cable without a USB Hub).

    No more problems with timing out on a PS4 when using cross-over controllers, and no more wireless lag issues if you are a pro gamer and want to use the CronusMAX so you have a wired DS4
    Last edited by GL0ZZ3N; 4th May 17 at 16:08.

  2. The Following 10 Users Say Thank You to MaxADMIN For This Useful Post:

Similar Topics

  1. Replies: 50
    Last Post: 3 Weeks Ago, 12:01
    By MaxADMIN in forum CronusMAX PLUS Official Guides
    Replies: 13
    Last Post: 4 Weeks Ago, 17:52
  3. [XBOX ONE] Timed routines & follow on combo's [help]
    By BFunk in forum Macro & Script Programming Support
    Replies: 3
    Last Post: 15th January 17, 15:43

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts