CMPlus stuck in what looks like standby mode.

[Laserbeak43]

Hi,
I tried testing a script that I wrote. I uploaded to my CMPlus successfully but when I switched to the profile/slot on the CMPlus so that I could test it in device monitor, the CMPlus started to flash as if it were in "Standby animation with both dots - No console or controller connected"
The only difference is, that the animation makes its way to upward and then resets, without going downward. There isn't description for this animation.
I've tried:

• Resetting the CMPlus by using the pin-hole and reuploading the firmware
• Disconnecting the CMPlus from the PC and plugging in my G27 and connecting to PS4
• Disconnecting CMPlus closing and reopening CMPro and then reconnecting
• Switching ports/cable
• Tried CMPro beta to go to 1.22
• Disabled Virus Scanner
• Tried a different PC
• Tried the official cable provided in package

The only time my device shows its connection status is when it's in Program mode..Any other time, it's "Device Disconnected".

Looks like this:

[Swizzy]

That looks exactly like the issue we had with the 1.23 firmware, not entirely sure what you should do since you've tried to downgrade it to 1.22 already :/

[musky]

try a different cable

[Laserbeak43]

That looks exactly like the issue we had with the 1.23 firmware, not entirely sure what you should do since you've tried to downgrade it to 1.22 already :/

Yeah, I'm wondering if the latest version of my script bricked it?? LOL.
It's a simple infinite while loop with a whole bunch of if statements. They aren't even nested. I don't know how it could... I'm waiting to see if email support can offer any suggestions.

try a different cable

I've tried a PS3 Cable and the official. Only thing I have left is a Wii U Gamepad Cable. I doubt it'll work, but it's worth a shot....

[MaxADMIN]

Yeah, I'm wondering if the latest version of my script bricked it?? LOL.

You'd need to post your script for us to comment

- - - Updated - - -

I've tried a PS3 Cable and the official.

The PS3 cable is notoriously unreliable. It's also possible our cable is faulty OR your USB port is iffy - but everything is pointing towards a bad script or bad device.

[Laserbeak43]

Well,
It turns out, email support is for sales only..
How do I go about getting more help with my problem?

-edit-
sorry, didn't see your previous post. Please see below.

[Laserbeak43]

You'd need to post your script for us to comment

- - - Updated - - -



The PS3 cable is notoriously unreliable. It's also possible our cable is faulty OR your USB port is iffy - but everything is pointing towards a bad script or bad device.

I did a build and run then pushed the slot selection button and my CMP said goodnight.

You Must Be Registered and Logged On With at Least 1 Post To View GPC Scripts...(If you are a new user wait 30 minutes for the system to update your account)

P.S.
I bought another one for my son 1 day before this happened, but I'm scared to test and see if my device is faulty.

[Swizzy]

Your script will never work, that may be the issue you're having, it's stuck in a endless loop...

Main is run like a while loop so you don't need that

I guess i'll have to add a way to erase all the slots as part of recovery so it don't end up in a weird loop like that, may help solve your problem...

[Laserbeak43]

Sweet. I'll try anything right now xD
Will you update this thread once you've done so?
Also, I've made a note of the fact that main() is a while loop. Makes sense.
Thanks!

[Laserbeak43]

Thanks Swizzy! You did it with the beta!!
Lifesaver. "sad that I have to go to work and can't play"

[G.Sanchez]

Thanks Swizzy! You did it with the beta!!
Lifesaver. "sad that I have to go to work and can't play"

Hey I am having the same problem. What was the solution if I may ask? My setup is as follows:

Cronus Verison-CronusMAX PLUZ V3
Firmwaver Version- 1.24
Controller-Xbox 360 Controller (original)
Console-XBOX1
Wired (Micro USB)
USB HUB? No

Attachment 4620Attachment 4621

I have been using a Xbox 360 Arcade Stick made by MadCatz for a whole day working fine. The next day I go to turn on my console using the controller and now my CronusMaxPlus is in stanby mode all the time. Even when I am plugin into my computer to try and reset it. When I plug my Cronus Max Plus into my Xbox1 the display on the Cronus is in standby mode with the top dot flashing (which means it does not read my Xbox1.) I have tried other my regular wired controller on my xbox and it works fine when not connected to the CronusMax. Please help. Thank you.