Results 1 to 2 of 2

Topic: G25 Cronusmax Plus V3 Firmware 1.24 ProjectCars donīt work

  1. #1
    Babyfaced Assassin

    User Info Menu

    G25 Cronusmax Plus V3 Firmware 1.24 ProjectCars donīt work

    Hello,

    since this morning (CET) I try to connect my G25 to my PS4 by the Cronusmax Plus V3. I installed the Firmware 1.24 and switched to the wheel operation mode. In the PS4 I disconnected the DS4 Bluetooth connection and switched it to USB only - it is working so far. Now I start ProjectCars via the DS4 (USB-connected) and then disconnect the USB connection.
    When now connecting the Cronusmax to the PS4 it initilized the way described in the manual (A,U). Afterwards I connect the DS4 to port 4 and the G25 to the port 1 of my USB-Hub (Anker 3.0 which is listed as working).
    The Cronusmax changes to 0 in the display and the G25 is rotating as well as the FFB is switched on. The DS4 remains off. At the screen is now shown that the device is disconnected. So I canīt restart ProjectCars again.
    Have you any idea what the reason could be or what I can try out to fix the problem?

    Regards.

    Edit: Perhaps it is important to admit that the G25 navigation via the shifter button is working in the PS4 home menue. only when switching to ProjectCARS it is not possible to use the buttons anymore.
    Last edited by LaForge; 1 Week Ago at 06:00.

  2. #2
    Forum Admin

    User Info Menu

    Re: G25 Cronusmax Plus V3 Firmware 1.24 ProjectCars donīt work

    Do you have this same problem with 1.23?

Similar Topics

  1. 2 CronusMAX, 1 does not work with 1.23 firmware
    By Amazo in forum Cronus PRO Software Support
    Replies: 3
    Last Post: 13th January 17, 08:39
  2. After update software and firmware GPC doesn't work
    By jmuniz in forum Cronus PRO Software Support
    Replies: 0
    Last Post: 24th November 16, 09:17
  3. Updated Firmware. now my old script dont work properly...
    By AssFat in forum CronusMAX PLUS Hardware Support
    Replies: 9
    Last Post: 30th August 16, 00:11
  4. Legacy Cronus Device updated to Max, updated firmware but doesn't work
    By mutedlogic in forum Cronus PRO Software Support
    Replies: 4
    Last Post: 1st January 15, 19:52

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •