1. INPUT (USB Type A Receptacle)
Connector for wired game controllers or wireless receivers.
2. PROFILE SWITCH
Use this button to switch between profiles stored in the CronusMAX internal flash memory. The counter resets to zero when it reaches the end of the profile list. Hold the button for 2 seconds to unload the current Profile.
The profile button can be emulated on your game controller. Check the “Device Options” on Gtuner manual for more details.
In programming mode the profile switch makes the CronusMAX return to normal mode.
Displays the current state of the CronusMAX such as the selected profile and any errors codes.
4. OUTPUT (USB Type A Plug)
To connect the CronusMAX on game consoles or PC.
5. PC PROG (USB Type Mini-B Receptacle)
Interface for programming, monitoring, testing, firmware update and API.
6. RESET BUTTON
The Reset button is hidden on the back of the CronusMAX and needs to be pressed with a pin or paperclip. This will force the CronusMAX to enter Programming Mode.
In cases where the CronusMAX was unable to complete a firmware update (i.e. power loss or other reasons) the CronusMAX will not work properly. In these situations, with the CronusMAX connected to the computer through the PC PROG port, press the reset button on the back of the device with a paperclip twice to force the CronusMAX to enter programming mode (the LED display will show the letter P). This will allow you to redo the firmware update.