×
Menu

Battlefield: Hardline

 
 
This GamePack for CronusMAX has 40 distinct MODS grouped into 13 classes and is specially optimized for Battlefield: Hardline. This GamePack allows you to make up to 16,920,576 combinations of MODS.
 
Instructions for Battlefield: Hardline GamePack
Compatible CronusMAX PLUS Firmware: 1.07+
Compatible Controllers: Dualshock 4, Dualshock 3, Xbox One, Xbox 360, Wii U Pro
Compatible Systems:Playstation 4, Xbox One, Playstation 3, Xbox 360 and Windows PC


IMPORTANT
If you have a CronusMAX PLUS, make sure you goto Tools > Options > CMax Plus and enable "Mimic Controller Player LEDs" in the CMax Plus Backlight area if you want the CronusMAX PLUS Backlight LED features to work. Also, for more information on the benefits of using a USB Hub with your CronusMAX PLUS Click Here


 

 

GamePack Operation
 
Quick Disable/Re-Enable GamePack:
 
Player LED 1: Controller in regular mode, the GamePack is disabled (Blue on DS4 / CronusMAX Backlight LED).
Player LED 4: The GamePack is enabled (Pink on DS4 / CronusMAX PLUS Backlight LED).
 

 

GamePack Configuration
 
How to Enter GamePack Menu Mode:
Hold SELECT+START for 2 seconds to enter menu mode.
Hold SHARE+OPTIONS for 2 seconds to enter menu mode.
Hold BACK+START for 2 seconds to enter menu mode.
Hold VIEW+MENU for 2 seconds to enter menu mode.
 
IMPORTANT
Always keep the SELECT/SHARE/BACK/VIEW button pressed while in Menu mode. To exit the menu mode, release the SELECT/SHARE/BACK/VIEW button.

 
Player LED 4 will blink the number of the current Class (DS4 will flash Pink).
Player LED 3 will blink the number of the active MOD for the current Class (DS4 will flash green).
 
NOTE

If the Player LED 3 is not blinking, it means either no MOD or the Default setting is selected for the current Class. See below for instructions how to navigate between Classes and MOD's.

You can also pre-configure your GamePack settings using the GamePack Configuration Interface (GCI) in Cronus Pro. The GCI opens automatically when you load a GamePack to a memory slot, or you can simply click on the memory slot number to the left of the loaded GamePack to open the GCI. As soon as you select your preferred settings, close the GCI and click the PROGRAM DEVICE button. To select the GamePack you wish to use on your console, press the Memory Slot button on the CronusMAX PLUS so that it highlights the corresponding number on the LED (so if you have a GamePack loaded to Memory Slot 1, the LED on the CronusMAX PLUS should display the number 1).

 
To Navigate Between Classes:

Goes Up
Goes Down
 
To Navigate Between Mods Within the Current Class:

Goes Up
Goes Down
 
Adjustable Mods (Rapid Fire and Quick Scope):
Reduces Value Increases Rate of Fire
Increases Value Reduces Rate of Fire
Test Current
Rate of Fire
 

 

GamePack Classes and Mods
 
Battlefield: Hardline
 
 

1
Class 1
Rapid Fire
When Rapid Fire is enabled, you can turn virtually any semi automatic weapon into a fully automatic weapon. This creates a very unique advantage for players using semi automatic weapons in Battlefield games. While Rapid Fire will not usually make a fully automatic gun shoot any faster, it can have positive side effects on fully automatic guns such as reducing recoil, helping players conserve ammunition and achieve more headshots.
 
HOW TO ADJUST THE RAPID FIRE SPEED
You can adjust Rapid Fire speed and test your settings within the game. (In Menu Mode: LB/L1 Reduce Value Increases Rate of Fire - RB/R1 Increase Value Reduces Rate of Fire - RT/R2 Test).

Increases
Rate of Fire
Decreases
Rate of Fire
Test current
Rate of Fire

 
MOD
Name
Description
0
Mod Disabled
 
1
Optimized Rapid Fire
This Rapid Fire is optimized to be as fast as possible but at the same time ensuring that every single shot will be correctly registered by the game.
2
Adjustable Rapid Fire
Adjustable
With Adjustable Rapid Fire you can always get the optimum firepower for your favorite weapon. See the menu system instructions above for more information on how to adjust your Rapid Fire speed in this mode.
3
Pulse Rapid Fire
Adjustable
Pulse Rapid Fire can reach a faster rate of fire with burst type weapons (i.e M16)
 

2
Class 2
Burst Fire
Burst firing is designed to turn semi automatic and automatic weapons into burst firing weapons. When this feature is enabled, your weapon will fire in bursts similar to the M16 in older Call of Duty versions and can be used with 1, 2, 3, 4, 5, or 6 round bursts. Burst firing can help reduce recoil and conserve ammunition.
 
The Burst Fire MOD can be used by itself (With the Rapid Fire MOD disabled) or can be used as a modifier for the Rapid Fire MOD.  That is, with Burst Fire and Rapid Fire enabled together, you will get a repeating burst of shots essentially giving you automatic Burst Fire. The delay between the bursts can be set with the Rapid Fire adjustable parameter allowing you to select how many rounds are fired per burst and the amount of time between bursts for a truly customizable experience.
 
MOD
Name
0
Mod Disabled
1
1 Round per Burst
2
2 Rounds per Burst
3
3 Rounds per Burst
4
4 Rounds per Burst
5
5 Rounds per Burst
6
6 Rounds per Burst
 

3
Class 3
Fire Mode
Fire mode determines an assist action to be used together with Rapid Fire and/or Burst Fire. These are normally applied to the triggers.
 
MOD
Name
Description
0
Mod Disabled
 
1
Scope Disable
The scope (ADS) disables Rapid Fire and Burst Fire.
2
Scope Enable
The scope (ADS) enables Rapid Fire and Burst Fire.
3
Press Sensitive
Rapid fire and Burst Fire will only be activated by fully pressing the fire button.
 

4
Class 4
Shot Mode
Assign an action to be performed automatically when you press the fire button.
 
MOD
Name
Description
0
Mod Disabled
 
1
Drop Shot
Scope Disable
When you pull the fire button, your character will drop to prone position and begin firing. This is useful for players that like to maintain stealth and reduce their target profile. This also assists in increasing accuracy in combat. This action is not performed if the scope (ADS) is in use.
2
Drop Shot
Press Sensitive
This performs the same action as drop shot but is only activated when you FULLY press the fire button.
3
Jump Shot
Scope Disable
When you press the fire button your character will immediately jump and begin firing. This action is not performed if the scope (ADS) is in use.
4
Jump Shot
Press Sensitive
Performs the same action as jump shot but is only activated when you FULLY press the fire button.
5
Side Shot
Scope Disable
When you press the fire button, your character will begin to make side movements and begin firing, confusing the enemy in the process. This action is not performed if the scope (ADS) is in use.
6
Side Shot
Press Sensitive
Performs the same action as side shot but is only activated when you FULLY press the fire button.
7
Scope Shot
Scope Disable
When you pull the fire button, your character will automatically use the scope (ADS). This is useful for single shot weapons, decreasing the spread effect and increasing accuracy in combat. This action is not performed if the scope (ADS) is in use.
 

5
Class 5
Scope Mode
Scope modes are MODS that are associated with using the scope (ADS).
 
MOD
Name
Description
0
Mod Disabled
 
1
Quick Scope
Timing Adjustable
The idea behind quick scope is to use a sniper rifle, scope IN and fire the shot as the gun scopes in. Perfecting the aiming and timing will allow you to become a one-man commando with your sniper rifle. To fire a quick scope shot, quickly TAP your scope button. The MOD will automatically scope in, take a shot, and scope out. Check the menu system instructions above for more information on how to adjust the timing in this mode.
2
Aim Helper
Campaign
Aim helper will focus on the nearest target when used in campaign mode.
 

6
Class 6
Hold Breath
This MOD is specially designed for sniper rifles. It automatically holds the sniper's breath when scoping in. Upon activation. the MOD will hold the sniper's breath when scoping. The player no longer has to push the left analog stick to hold breath. NOTE: The Hold Breath MOD can be used with Easy Sprint and/or Quick Scope simultaneously.
 
MOD
Name
Description
0
Mod Disabled
 
1
Fully Auto
Hold breath at the same time you press the scope (ADS) button.
2
Press Sensitive
Hold breath is only active if the scope (ADS) button is FULLY pressed.
 

7
Class 7
Auto Spot
Automatically spot your opponents from across the battlefield. With Auto Spot active your character will mark where your opponents are located simply by looking in their general direction. A ridiculous advantage in team matches.
 
MOD
Name
Description
0
Mod Disabled
 
1
Always Enabled
Auto Spot enabled.
2
Scope Enable
Auto Spot is activated only when the Scope button is pressed.
 

8
Class 8
Easy Sprint
If you are tired of constantly pressing the left analog stick to make your character sprint, Easy Sprint is just what you have been looking for. NOTE: The Easy Sprint MOD CAN be used with Hold Breath and Quick Scope simultaneously.
 
MOD
Name
Description
0
Mod Disabled
 
1
Fully Auto
Your character will sprint at the same time you begin to move him forward.
2
Press Sensitive
Your character will sprint if the analog stick is FULLY pressed forward. The character will walk regular speed if the analog stick is only slightly pressed forward.
 

9
Class 9
Accelerometer Aim Assist
With Accelerometer Aim Assist, you can use a Six-Axis DualShock 4 or DualShock 3 controller to aim while scoping. This means you can move the controller to adjust the target position when scoped in. This MOD will not affect aiming with the right stick. It will only add an additional option to aim with. Each of the modes will add sensitivity with mode 1 being the least sensitive and mode 5 being the most sensitive.
 
MOD
Name
0
Mod Disabled
1
Sensitivity 1
2
Sensitivity 2
3
Sensitivity 3
4
Sensitivity 4
5
Sensitivity 5
 

10
Class 10
Button Layout
Most users play their favorite Battlefield games using the default button layout but a lot of players do use optional button layout and switch their analog stick positions. With the Button Layouts you can make any of the MODS on the CronusMAX PLUS work with your favorite button layout.
 
MOD
Name
0
Default
1
Veteran
2
Lefty
3
Lefty Veteran
 

11
Class 11
Button Swap
This unique feature allows you to setup special remapping to best adjust the controller to your personal taste.
 
MOD
Name
Description
0
Mod Disabled
 
1
Bumpers <> Triggers
Swap the bumper and triggers to convert your controller from Xbox to PlayStation style or vice versa.
2
Analogs
Swap the analog sticks. For left handed gamers.
3
Bumpers <> Triggers AND Analogs
Combines both swaps above.
 

12
Class 12
Bunny Hop
This MOD allows the player to automatically jump repeatedly in order to move faster, instead of just running. Moving in a zigzag pattern while bunny hopping is the fastest way to move around, making the player an even more difficult target.
 
MOD
Name
Description
0
Bunny Hop: OFF
Disable Bunny Hop
1
Bunny Hop: ON
Press and hold the JUMP button to start bunny hopping. You can also lock the Bunny Hop MOD by pressing the SPRINT button once, this allows you to not have to hold the JUMP button and freely maneuver both analog sticks, to stop bunny hopping release the movement sticker.
 

13
Class 13
Auto Switch Flashlight (Laser Sight)
This MOD automatically switch the weapon flashlight (or laser sight) as you fire or raise the ADS (scope).
 
MOD
Name
Description
0
OFF
Auto switch disabled
1
Fire Auto Switch
Automatically switch on the flashlight (laser sight) when start firing, and switch it off when stop firing.
2
Scope Auto Switch
Same as above, but for ADS (scope).
 
 

 

Combining Mod Classes
 
This GamePack allows you choose and combine one MOD from each Class, being possible to have a total of 13 active MODS at the SAME TIME. This means you can make combinations such as Burst Fire added to Rapid Fire, resulting in an exclusive "Automatic Burst Fire" MOD. The Automatic Burst Fire can be optimized by adjusting the number of bullets fired per burst as well as the time between bursts. For additional optimization, you can add the "Scope Enable" MOD, which will make the Automatic Burst Fire become activated only when the ADS scope is in use.
 
You can experiment and use whatever combinations suit your playing style best. The possibilities are endless and with the exclusive "Press Sensitive" feature, you can assign two different MODS to one single button for combinations like "Adjustable Pulse Rapid Fire" and "Drop Shot Press Sensitive".
 

 

Quick Reference: Classes and Mods
 
01: RAPID FIRE
02: BURST FIRE
03: FIRE MODE
00: Mod Disabled
01: Optimized Rapid Fire
02: Adjustable Rapid Fire (Adjustable)
03: Pulse Rapid Fire (Adjustable)
00: Mod Disabled
01: 1 Round per Burst
02: 2 Rounds per Burst
03: 3 Rounds per Burst
04: 4 Rounds per Burst
05: 5 Rounds per Burst
06: 6 Rounds per Burst
00: Mod Disabled
01: Scope Disable
02: Scope Enable
03: Press Sensitive
04: SHOT MODE
05: SCOPE MODE
06: HOLD BREATH
00: Mod Disabled
01: Drop Shot: Scope Disable
02: Drop Shot: Press Sensitive
03: Jump Shot: Scope Disable
04: Jump Shot: Press Sensitive
05: Side Shot: Scope Disable
06: Side Shot: Press Sensitive
07: Scope Shot: Scope Disable
00: Mod Disabled
01: Quick Scope (Adjustable)
02: Aim Helper (Campaign)
 
Quick Scope Activation: Quick TAP on scope button.
00: Mod Disabled
01: Fully Auto
02: Press Sensitive
07: AUTO SPOT
08: EASY SPRINT
09: ACCEL AIM ASSIST
00: Mod Disabled
01: Bad Company 1 & 2
02: Battlefield 3
00: Mod Disabled
01: Fully Auto
02: Press Sensitive
00: Mod Disabled
01: Sensitivity 1
02: Sensitivity 2
03: Sensitivity 3
04: Sensitivity 4
05: Sensitivity 5
06: Sensitivity 6
10: BUTTON LAYOUT
11: BUTTON SWAP
12: BUNNY HOP
00: Default
01: Veteran
02: Lefty
03: Lefty Veteran
00: Mod Disabled
01: Bumpers <> Triggers
02: Analogs
03: Bumpers <> Triggers + Analogs
00: Mod Disabled
01: Mod Enabled
13: AUTO SWITCH FLASHLIGHT/LASER SIGHT
 
 
00: OFF
01: Fire Auto Switch
02: Scope Auto Switch