×
Menu

Bracket Reset Tournament

 
 
This GamePack is the perfect addition for Pro Gamers competing in a Bracket Reset Tournament. It gives you the option of remapping the back/select/view button of a crossover controller to the PS4 touchpad - perfect for those using crossover controllers on a PS4 console and still need access to touchpad functions. It also gives you control over the manual PS4 authentication for those who are not using a USB Hub and have partial crossover support enabled.
 
This GamePack has been designed exclusively for Unequalled Media in association with ESL Gaming Network, EGX Pro Tour, VSFighting and Red Fight District.
 
A very special thanks to GamePack legend, KittyDawn (Andrew).
 
Instructions for Bracket Reset Tournament GamePack
Compatible CronusMAX PLUS Firmware: 1.07+
Compatible Controllers: Dualshock 4, Dualshock 3, Xbox One, Xbox 360, Wii U Pro
Compatible Systems:Playstation 4


IMPORTANT
If you have a CronusMAX PLUS, make sure you goto Tools > Options > CMax Plus and enable "Mimic Controller Player LEDs" in the CMax Plus Backlight area if you want the CronusMAX PLUS Backlight LED features to work. Also, for more information on the benefits of using a USB Hub with your CronusMAX PLUS Click Here


 

 

GamePack Operation
 
Quick Disable/Re-Enable GamePack:
Note: If you are on a PlayStation 4 console use TouchPad instead of Share (DualShock 4 Controllers)
 
Player LED 1: Controller in regular mode, the GamePack is disabled (Blue on DS4 / CronusMAX Backlight LED).
Player LED 4: The GamePack is enabled (Pink on DS4 / CronusMAX PLUS Backlight LED).
 

 

GamePack Configuration
 
How to Enter GamePack Menu Mode:
Note: If you are on a PlayStation 4 console use TouchPad instead of Share (DualShock 4 Controllers)*
Hold SELECT+START for 2 seconds to enter menu mode.
Hold SHARE+OPTIONS for 2 seconds to enter menu mode*
Hold BACK+START for 2 seconds to enter menu mode.
Hold VIEW+MENU for 2 seconds to enter menu mode.
 
IMPORTANT
Always keep the SELECT/SHARE/BACK/VIEW button pressed while in Menu mode. To exit the menu mode, release the SELECT/SHARE/BACK/VIEW button.

 
Player LED 4 will blink the number of the current Class (DS4 will flash Pink).
Player LED 3 will blink the number of the active MOD for the current Class (DS4 will flash green).
 
NOTE

If the Player LED 3 is not blinking, it means either no MOD or the Default setting is selected for the current Class. See below for instructions how to navigate between Classes and MOD's.

You can also pre-configure your GamePack settings using the GamePack Configuration Interface (GCI) in Cronus Pro. The GCI opens automatically when you load a GamePack to a memory slot, or you can simply click on the memory slot number to the left of the loaded GamePack to open the GCI. As soon as you select your preferred settings, close the GCI and click the PROGRAM DEVICE button. To select the GamePack you wish to use on your console, press the Memory Slot button on the CronusMAX PLUS so that it highlights the corresponding number on the LED (so if you have a GamePack loaded to Memory Slot 1, the LED on the CronusMAX PLUS should display the number 1).

 
To Navigate Between Classes:

Goes Up
Goes Down
 
To Navigate Between Mods Within the Current Class:

Goes Up
Goes Down
 

 

GamePack Video Guide & Demonstration
 
 

 

GamePack Classes and Mods
 
Bracket Reset Tournament
 
 

1
Class 1
PlayStation 4 Authentication Timeout Notification
When using a non-DS4 controller on a PlayStation 4, the authentication will timeout after 10 minutes and the signal will reset between the console and the controller (If you are not using the latest CronusMAX PLUS 1.20+ Firmware Update and a USB Hub). This only takes less than a second but can interrupt gameplay. You have the option of being notified when the controller authentication is about to timeout so this gives you time to prepare so you're not caught in a compromising position. You can choose to either be notified by LED 4, the CronusMAX PLUS Backlight LED or Trigger Rumble (See Class 2). The LED flashing and trigger rumbles will become more frequent the less time you have until an automatic reset will occur. You can set this MOD to start notifying you X amount of Minutes and Seconds from when the Auth Timeout will occur.
IMPORTANT INFO
You can hold back/select/view and press A/Cross to manually reset the authentication timer.

NOTE
This MOD is not required if you are using a USB Hub for PS4 Full Time Cross Over Support.

 
MOD
Name
Backlight LED Color
0
Mod Disabled
Green - If you are using a CronusMAX PLUS firmware v1.20+ and a USB Hub for Full Time PS4 Crossover Support there is no need for this MOD so you can disable it.
1
30 Seconds
Red
2
1 Minute
Red
3
1 Minute 30 Seconds
Yellow
4
2 Minutes
Yellow
5
2 Minutes 30 Seconds
Green
6
3 Minutes
Green
 

2
Class 2
Authentication Timeout Notification System
This class to give you the option of how you want the GamePack to notify you when the Auth Timeout is close to occurring. You have the option of being notified by LED 4 / CronusMAX PLUS Backlight LED flashing or LED 4 / CronusMAX PLUS Backlight LED flashing plus the controller rumbling.
NOTE
This MOD is not required if you are using a USB Hub for PS4 Full Time Cross Over Support.

 
MOD
Name
Description
0
LED Notification
LED 4 / CronusMAX PLUS Backlight LED will Flash more frequently the less time you have until the Auth Timeout occurs.
1
LED + Rumble Notification
LED 4 / CronusMAX PLUS Backlight LED will Flash & controller rumbling more frequently the less time you have until the Auth Timeout occurs.
 

3
Class 3
PS4 Manual Authentication Reset Timer
This class lets you choose how long you have to hold Back + A to reset the Authentication Timeout. This is useful for people that wish to plink during gameplay.
NOTE
This MOD is not required if you are using a USB Hub for PS4 Full Time Cross Over Support.

 
MOD
Name
Description
0
Instant
The time is reset as soon as A is pressed
1
1 Second
Hold Back + A for 1 second to reset the Authentication timeout
2
2 Seconds
Hold Back + A for 2 seconds to reset the Authentication timeout
3
3 Seconds
Hold Back + A for 3 seconds to reset the Authentication timeout
 

4
Class 4
Remap View to Touchpad Press
When using a non-DS4 controller on a PlayStation 4, this class allows you to choose if the Back button will operate the Touchpad or Share button to access the Share Screen. If enabled, the Back button will emulate pressing the Touchpad and Back + RS/R3 will emulate pressing the Share button. If disabled, Back will emulate presssing the Share button and Back + RS/R3 will emulate pressing the Touchpad.
 
MOD
Name
Description
0
Mod Enabled
Back button will press the Touchpad and Back + RS/R3 will press the Share button.
1
Mod Disabled
Back button will press the Share button and Back + RS/R3 will press the Touchpad.
 

5
Class 5
GamePack Menu System
Assign an action to be performed automatically when you press the fire button.
 
MOD
Name
Description
0
LEDs
Back button will press the Touchpad and Back + RS/R3 will press the Share button.
1
Trigger Rumble
Back button will press the Share button and Back + RS/R3 will press the Touchpad.
 
 

 

Quick Reference: Classes and Mods
 
01: PS4 AUTH TIMEOUT NOTIFICATION
02: AUTH TIMEOUT NOTIFICATION SYSTEM
03: PS4 MANUAL AUTH RESET TIMER
00: Mod Disabled
01: 30 Seconds
02: 1 Minute
03: 1 Minute 30 Seconds
04: 2 Minutes
05: 2 Minutes 30 Seconds
06: 3 Minutes
 
Backlight LED Colors:
3 Minutes: Green
2 Minutes: Yellow
1 Minute: Red
 
00: LED Notification
01: LED + Rumble Notification
 
00: Instant
01: 1 Second
02: 2 Seconds
03: 3 Seconds
 
04: REMAP VIEW TO TOUCHPAD PRESS
05: GAMEPACK MENU SYSTEM
 
01: Mod Enabled
02: Mod Disabled
 
01: LEDs
01: Trigger Rumble