Most users play Dying Light using the default button preset but a lot of players do use the optional Southpaw layout. With the In Game Button Preset you can make any of the Mods on the CronusMAX PLUS work with your favorite preset, so select the option here which matches your in game options and the GamePack will optimize all MOD Classes to your preferred layout.

 

 

 

Here you let the GamePack know which stick layout you are using in game so it can optimize the appropriate MODS.

 

 

 

Tell the GamePack what your Trigger Preset settings you are using in game so it can adjust the relevant MODS.

 

 

 

Tired of breaking picks? If enabled, when you are ready to pick a lock, simply press LS/L3 and RS/R3 at the same time and watch the CronusMAX PLUS do the work for you. This MOD has been optimized for the Xbox One. Due to extra feedback this console gives us, we can detect which direction the pick needs to be moved for a successful pick.

 

This MOD will also automatically reduce the amount of movement the pick makes depending on how close you are to the sweet spot.

 

 

 

We've given you the option of varying the adjustment amount of the lockpick here. We had 100% success with it set to Average, however that may not work for you or your system so we created the option to adjust how much the lockpick moves each attempt.

 

 

In this game, you can hold the A button to scan the area for items, collectables and enemies for example. It does get a bit tedious though to keep pressing the button when you are searching for something. This MOD will automate the task for you. We have given you two options, you can either hold the sense button down and the CronusMAX PLUS will automatically keep pressing the button for you (Note, there is a delay before it starts so the MOD will not interfere with other actions such as using a dead zombie to camouflage yourself).

 

The other option is to toggle the MOD On and Off. You can toggle it On in two ways, you can hold the sense button for 3 seconds or, while holding the sense button, press UP on the Directional Pad. When in toggle mode, your controller will rumble once to let you know the MOD is active and will rumble twice to let you know it has been switched off. When the MOD is active in toggle mode, simply press the sense button again to disable it.

 

 

 

This MOD automates the task of pressing the Sprint button for you. For this MOD to be effective, please ensure Classes 1-3 match your In Game settings. The MOD gives you two options, Always On (The sprint button is pressed as soon at you push the movement stick forward) and Press Sensitive (The sprint button is pushed when the movement stick is push all the way).

 

 

This MOD automates the task of pressing the Looting button for you. It can either be enabled for characters with or without the Nimble Hands Skill unlocked in the survivor skill tree. Simply hold down the loot button to activate this MOD.

 

 

 

This MOD will turbo the crouch/slide button when it is held down. This is handy if you have the Forward Roll Skill unlocked in the Agility Skill tree as it enabled you to fall from a greater height that usual. This MOD makes the task of pressing the crouch button at the correct time much easier.

 

 

We're not a fan of pressing the stick to look down the sights when using a gun. So we created this MOD which swaps your aim button with your Use Equipment button. It also removes the toggle function of the Aim button. This has two affects, we think it makes it feel more natural when using a gun and it also saves you from double clicking the button to aim your melee weapons.

 

 

 

We personally find it hard to get used to pressing a bumper/trigger button to jump. Therefore we've given you the option to swap your jump button with the A/Cross button. It makes more sense to to press A/Cross to jump.

 

 

You don't want to be using guns much in this game as they make a lot of noise and draw unwanted attention but we thought it would be helpful to be able to get any shots over and done with quickly, so we added an adjustable Rapid Fire to this GamePack. It certainly helps when you are dealing with living enemies!

 

 

 

Here you can set how many burst shots the Rapid Fire MOD will shoot if set to Burst Fire mode.

 

 

When using a non-DS4 controller on a PlayStation 4, the authentication will timeout after 10 minutes and the signal will reset between the console and the controller (If you are not using the latest CronusMAX PLUS 1.20+ Firmware Update and a USB Hub). This only takes less than a second but can interrupt gameplay. You have the option of being notified when the controller authentication is about to timeout so this gives you time to prepare so you're not caught in a compromising position. You can choose to either be notified by LED 4, the CronusMAX PLUS Backlight LED or Trigger Rumble (See Class 15). The LED flashing and trigger rumbles will become more frequent the less time you have until an automatic reset will occur. You can set this MOD to start notifying you X amount of Minutes and Seconds from when the Auth Timeout will occur.

 

 

This class to give you the option of how you want the GamePack to notify you when the Auth Timeout is close to occurring. You have the option of being notified by LED 4 / CronusMAX PLUS Backlight LED flashing or LED 4 / CronusMAX PLUS Backlight LED flashing plus the controller rumbling.