×
Menu

Loadout

 
 
The Loadout GamePack for CronusMAX PLUS has 24 distinct MODS grouped into 9 classes, including Rapid Fire, Easy Sprint, Bunny Hop and Turbo Melee.
 
Instructions for Loadout GamePack
Compatible CronusMAX PLUS Firmware: 1.07+
Compatible Controllers: Dualshock 4, Dualshock 3, Xbox One, Xbox 360, Wii U Pro
Compatible Systems:Playstation 4 and Windows PC


IMPORTANT
If you have a CronusMAX PLUS, make sure you goto Tools > Options > CMax Plus and enable "Mimic Controller Player LEDs" in the CMax Plus Backlight area if you want the CronusMAX PLUS Backlight LED features to work. Also, for more information on the benefits of using a USB Hub with your CronusMAX PLUS Click Here


 

 

GamePack Operation
 
Quick Disable/Re-Enable GamePack:
 
Player LED 1: Controller in regular mode, the GamePack is disabled (Blue on DS4 / CronusMAX Backlight LED).
Player LED 4: The GamePack is enabled (Pink on DS4 / CronusMAX PLUS Backlight LED).
 

 

GamePack Configuration
 
How to Enter GamePack Menu Mode:
Hold SELECT+START for 2 seconds to enter menu mode.
Hold SHARE+OPTIONS for 2 seconds to enter menu mode.
Hold BACK+START for 2 seconds to enter menu mode.
Hold VIEW+MENU for 2 seconds to enter menu mode.
 
IMPORTANT
Always keep the SELECT/SHARE/BACK/VIEW button pressed while in Menu mode. To exit the menu mode, release the SELECT/SHARE/BACK/VIEW button.

 
Player LED 4 will blink the number of the current Class (DS4 will flash Pink).
Player LED 3 will blink the number of the active MOD for the current Class (DS4 will flash green).
 
NOTE

If the Player LED 3 is not blinking, it means either no MOD or the Default setting is selected for the current Class. See below for instructions how to navigate between Classes and MOD's.

You can also pre-configure your GamePack settings using the GamePack Configuration Interface (GCI) in Cronus Pro. The GCI opens automatically when you load a GamePack to a memory slot, or you can simply click on the memory slot number to the left of the loaded GamePack to open the GCI. As soon as you select your preferred settings, close the GCI and click the PROGRAM DEVICE button. To select the GamePack you wish to use on your console, press the Memory Slot button on the CronusMAX PLUS so that it highlights the corresponding number on the LED (so if you have a GamePack loaded to Memory Slot 1, the LED on the CronusMAX PLUS should display the number 1).

 
To Navigate Between Classes:

Goes Up
Goes Down
 
To Navigate Between Mods Within the Current Class:

Goes Up
Goes Down
 

 

GamePack Classes and Mods
 
Loadout
 

1
Class 1
Rapid Fire
When Rapid Fire is enabled, you can turn virtually any semi automatic weapon into a fully automatic weapon. This creates a very unique advantage for players using semi automatic weapons in the Loadout game. While Rapid Fire will not usually make a fully automatic gun shoot any faster, it can have positive side effects on fully automatic guns such as reducing recoil, helping players conserve ammunition and achieve more headshots.
 
HOW TO ADJUST THE RAPID FIRE SPEED
You can adjust Rapid Fire speed and test your settings within the game. (In Menu Mode: LB/L1 Reduce Value Increases Rate of Fire - RB/R1 Increase Value Reduces Rate of Fire - RT/R2 Test).

Increases
Rate of Fire
Decreases
Rate of Fire
Test current
Rate of Fire

 
MOD
Name
Description
0
Mod Disabled
 
1
Optimized Rapid Fire
This Rapid Fire is optimized to be as fast as possible but at the same time ensuring that every single shot will be correctly registered by the game.
2
Symmetric Rapid Fire
Adjustable
With Symmetric Adjustable Rapid Fire you can always get the optimum firepower for your favorite weapon. See the menu system instructions above for more information on how to adjust your Rapid Fire speed in this mode.
3
Asymmetric Rapid Fire
Adjustable
The Asymmetric Rapid Fire you can precisely set the amount of time the fire button should be held down and how long it should be released. For example you can set the asymmetric Rapid Fire to fire for 120ms and wait 90ms for the next firing loop. The hold and release times can be adjusted using the GamePack Configuration Interface in Cronus PRO.
 

2
Class 2
Fire Mode
Fire mode determines an assist action to be used together with Rapid Fire and/or Burst Fire. These are normally applied to the triggers.
 
MOD
Name
Description
0
Mod Disabled
 
1
Zoom Disable
The zoom (ADS) disables Rapid Fire.
2
Zoom Enable
The zoom (ADS) enables Rapid Fire.
3
Press Sensitive
Rapid Fire will only be activated by fully pressing the fire button.
 

3
Class 3
Secondary Rapid Fire
If Secondary Rapid Fire is enabled it will take place when the regular Rapid Fire is not actuating. For example if your regular Rapid Fire is only active when scoping then the secondary Rapid Fire will be activated when you are not using scope. This behavior can be very handy to set a precise rate of fire while aiming and a more aggressive rate of fire while hipfiring.
 
HOW TO ADJUST THE SECONDARY RAPID FIRE SPEED
You can adjust Secondary Rapid Fire speed and test your settings within the game. (In Menu Mode: LB/L1 Reduce Value Increases Rate of Fire - RB/R1 Increase Value Reduces Rate of Fire - RT/R2 Test).

Increases
Rate of Fire
Decreases
Rate of Fire
Test current
Rate of Fire

 
MOD
Name
Description
0
Mod Disabled
 
1
Optimized Rapid Fire
This Secondary Rapid Fire is optimized to be as fast as possible but at the same time ensuring that every single shot will be correctly registered by the game.
2
Adjustable Rapid Fire
Adjustable
With Adjustable Secondary Rapid Fire you can always get the optimum firepower for your favorite weapon. See the menu system instructions above for more information on how to adjust your Rapid Fire speed in this mode.
3
Pulse Rapid Fire
Adjustable
Pulse Secondary Rapid Fire can reach a faster rate of fire with burst type weapons.
 

4
Class 4
Shot Modes
Assign an action to be performed automatically when you press the fire button.
 
MOD
Name
Description
0
Mod Disabled
 
1
Jump Shot
Scope Disable
When you press the fire button your character will immediately jump and begin firing. This action is not performed if the scope (ADS) is in use.
2
Jump Shot
Press Sensitive
Performs the same action as jump shot but is only activated when you FULLY press the fire button.
3
Side Shot
Zoom Disable
When you press the fire button, your character will begin to make side movements and begin firing, confusing the enemy in the process. This action is not performed if the zoom (ADS) is in use.
4
Side Shot
Press Sensitive
Performs the same action as side shot but is only activated when you FULLY press the fire button.
5
Zoom Shot
Zoom Disable
When you pull the fire button, your character will automatically use the zoom (ADS). This is useful for single shot weapons, decreasing the spread effect and increasing accuracy in combat. This action is not performed if the zoom (ADS) is in use.
 

5
Class 5
Accelerometer Aim Assist
With Accelerometer Aim Assist, you can use a Six-Axis DualShock 4 or DualShock 3 controller to aim while scoping. This means you can move the controller to adjust the target position when scoped in. This MOD will not affect aiming with the right stick. It will only add an additional option to aim with. Each of the modes will add sensitivity with mode 1 being the least sensitive and mode 5 being the most sensitive.
 
MOD
Name
0
Mod Disabled
1
Sensitivity 1
2
Sensitivity 2
3
Sensitivity 3
4
Sensitivity 4
5
Sensitivity 5
 

6
Class 6
Easy Sprint
If you are tired of constantly pressing the left analog stick to make your character sprint, Easy Sprint is just what you have been looking for.
 
MOD
Name
Description
0
Mod Disabled
 
1
Always On
Your character will sprint at the same time you begin to move him forward.
2
Press Sensitive
Your character will sprint if the analog stick is FULLY pressed forward. The character will walk regular speed if the analog stick is only slightly pressed forward.
 

7
Class 7
Bunny Hop
This MOD allows the player to automatically jump repeatedly in order to move faster, instead of just running. Moving in a zigzag pattern while bunny hopping is the fastest way to move around, making the player an even more difficult target.
 
MOD
Name
Description
0
Mod Disabled
 
1
Bunny Hop Enabled
Press and hold the JUMP button to start bunny hopping. You can also lock the Bunny Hop MOD by pressing the SPRINT button once, this allows you to not have to hold the JUMP button and freely maneuver both analog sticks, to stop bunny hopping release the movement stick.
 

8
Class 8
Turbo Melee
Turbo Melee significantly decreases the time the character has to wait between knife attacks. Once you have activated Turbo Melee, all you need to do to perform a melee attack is press your melee attack button. Get ready for knife kill sprees and easier kills with your riot shield.
 
MOD
Name
Description
0
Mod Disabled
 
1
Mod Enabled
Turbo Melee Enabled
 

9
Class 9
Button Swap
This unique feature allows you to setup special remapping to best adjust the controller to your personal taste.
 
MOD
Name
Description
0
Mod Disabled
 
1
Circle/B with Melee
Swap the the Circle/B button with the Melee button
 
 

 

Quick Reference: Classes and Mods
 
01: RAPID FIRE
02: FIRE MODE
03: SECONDARY RAPID FIRE
00: Mod Disabled
01: Optimized Rapid Fire
02: Symmetric Rapid Fire (Adjustable)
03: Asymmetric Rapid Fire (Adjustable)
00: Mod Disabled
01: Zoom Disable
02: Zoom Enable
03: Press Sensitive
00: Mod Disabled
01: Optimized Rapid Fire
02: Adjustable Rapid Fire
03: Pulse Rapid Fire
 
04: SHOT MODE
05: ACCEL AIM ASSIST
06: EASY SPRINT
00: Mod Disabled
01: Jump Shot: Zoom Disable
02: Jump Shot: Fully Press
03: Side Shot: Zoom Disable
04: Side Shot: Fully Press
05: Zoom Shot: Zoom Disable
 
00: Mod Disabled
01: Sensitivity 1
02: Sensitivity 2
03: Sensitivity 3
04: Sensitivity 4
05: Sensitivity 5
 
00: Mod Disabled
01: Fully Auto
02: Press Sensitive
07: BUNNY HOP
08: TURBO MELEE
09: BUTTON SWAP
00: Mod Disabled
01: Mod Enabled (Sprint Button locks)
 
00: Mod Disabled
01: Mod Enabled
 
00: Mod Disabled
01: Circle/B with Melee