Results 1 to 5 of 5

Topic: Logitech G502 - Black Ops III - XBOX ONE

  1. #1

    User Info Menu

    Logitech G502 - Black Ops III - XBOX ONE

    These official mouse tuning guides will show you how to setup your Mice software settings, Cronus Pro X-AIM settings and In-game settings so that they work to perfection - as played by our own team of professionals.

    [SIZE=5]Mouse: Cronus PRO then upgrade your CronusMAX PLUS to the latest Firmware

    I highly recommend running the Cronus Scrubber first. This will erase any trace of a previous installation and start your Cronus install from a clean slate.


    With the latest X-AIM (v1.11+), you no longer have to disconnect the PS4 or XB1 controller (once it has authenticated) or have it connected to a USB hub before you start to tune your mouse settings. By default the values from the CM Input are now blocked. This is very important - it's so that no values are read from the controller and everything starts from zero. Before this new feature was introduced, many users were tuning their mouse with the controller still connected and wondering why their mouse was sluggish when turning one way and not the other, or only turned left and not right. This was because their analog stick was not sitting at zero and was affecting the mouse output.

    This feature cures that. You can also disable the feature so that the controller Input can be read (if you want to use mouse and controller at the same time). Naturally you should do this AFTER you have tuned your mouse.

    Simply untick these options in X-AIM:

    You first need to get your DPI, Polling Rate, and Mouse Layout set up correctly.

    Create a profile in the Logitech Gaming Software to match the one shown below:

    1. Take note of the mouse buttons that have been re-mapped to a keypress (in this case numbers 0, 8 and 9) - as the default functions change your DPI and Mouse Profile which you don't want to do.
    2. Assign your Default DPI to 2400
    3. DPI Shift can be any number you choose, but should ALWAYS be lower than your Default DPI
    4. Assign your Polling Rate to 500



    Create a new X-AIM layout and map your keys like so:
    You can of course choose any layout you like, however this is one I recommend for this game. If you have any issues setting up X-AIM, follow these instructions:

    EXTRA: Add this GPC script to the new X-AIM layout if you wish to have a toggle ADS, with the ability to adjust your ADS sensitivity:

    Configure your mouse settings in X-AIM (Layout options > Mouse Settings)
    Match the mouse settings in your layout to look EXACTLY like the image below:

    Remember to match your Mouse DPI to the default DPI you set in the Logitech Gaming Software (in this case 2400). This is VERY important.

    * If your mouse feels too sensitive, you can lower the sensitivity in MOUSE SETTINGS. Lower this value by 1 digit at a time, until it feels good to you.

    * If you wish to be a sniper I would recommend changing the DEADZONE setting to 23. This will allow slower in-game turning with slower physical mouse movement, however you will need to move your mouse much more if you are trying to look behind you.


    The final step is to open the in-game options menu, and raise your sensitivity settings to the maximum.

    1. NEVER lower the in-game sensitivity when playing with a mouse. This will cause a delay with your mouse and give you a "lag" feeling.
    2. Aim Assist and Target assist can be enabled or disabled - this is personal preference, but feels more PC-Like having both Disabled.
    3. Please keep your "Button Layout" and "Stick Layout" set to DEFAULT.

    Feel free to leave comments and feedback below. We'd also love to hear your suggestions if you made any adjustments to these settings.

  2. The Following 2 Users Say Thank You to GL0ZZ3N For This Useful Post:

  3. #2
    Community Boss

    User Info Menu

    Re: Logitech G502 - Black Ops III - XB1

    As much as we like to encourage you to create layouts and tune the mouse settings yourself, you can also download the actual layout file used in the guide above that you can easily import into X-AIM - complete with the gpc script, all ready to go

    Attached Files Attached Files

  4. #3

    User Info Menu

    Re: Logitech G502 - Black Ops III - XBOX ONE

    Added a video of me playing the game so you can see my mouse in action I'm a little rusty in Black Ops III - but as you can see there is ZERO LAG, awesome response and some pretty badass headsots

  5. #4

    User Info Menu

    Re: Logitech G502 - Black Ops III - XBOX ONE

    Thanks for posting.

    8ballpool googlehangouts omegle

  6. #5

    User Info Menu

    Re: Logitech G502 - Black Ops III - XBOX ONE

    Could you help me set it up on ps4 using the cronusmax plus idk how to set it up to use a mouse an ps3 navigation controller

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts