Results 1 to 6 of 6

Topic: Corsair M65 FPS - Battlefield 1

  1. #1
    MASTER GUARDIAN ELITE

    User Info Menu

    Corsair M65 FPS - Battlefield 1

    These official mouse tuning guides will show you how to setup your Mice software settings, Cronus Pro X-AIM settings and In-game settings so that they work to perfection - as played by our own team of professionals.

    [SIZE=5]Mouse: Cronus PRO then upgrade your CronusMAX PLUS to the latest Firmware

    I highly recommend running the Cronus Scrubber first. This will erase any trace of a previous installation and start your Cronus install from a clean slate.

    INFO


    With the latest X-AIM (v1.11+), you no longer have to disconnect the PS4 or XB1 controller (once it has authenticated) or have it connected to a USB hub before you start to tune your mouse settings. By default the values from the CM Input are now blocked. This is very important - it's so that no values are read from the controller and everything starts from zero. Before this new feature was introduced, many users were tuning their mouse with the controller still connected and wondering why their mouse was sluggish when turning one way and not the other, or only turned left and not right. This was because their analog stick was not sitting at zero and was affecting the mouse output.

    This feature cures that. You can also disable the feature so that the controller Input can be read (if you want to use mouse and controller at the same time). Naturally you should do this AFTER you have tuned your mouse.

    Simply untick these options in X-AIM:





    Create a profile in the Vengeance M65 Software to match the one shown below:

    1. Assign all of your mouse buttons to their default values.
    2. Assign your Report Rate to 1ms in the Manage Performance screen.
    3. Assign your DPI in slot 2 to 2400 - This will be the DPI we use in-game.

    PC SOFTWARE SETTINGS






    CRONUS PRO (X-AIM) SETTINGS

    Create a new X-AIM layout and map your keys like so:
    You can of course choose any layout you like, however this is one I recommend for this game. If you have any issues setting up X-AIM, follow these instructions: https://cronusmax.com/forums/showthread.php?t=147133

    EXTRA: Add this GPC script to the new X-AIM layout if you wish to have a toggle ADS, with the ability to adjust your ADS sensitivity: https://cronusmax.com/gpclib/?s=2644




    Configure your mouse settings in X-AIM (Layout options > Mouse Settings)
    Match the mouse settings in your layout to look EXACTLY like the image below:

    Remember to match your Mouse DPI to the default DPI you set in the Vengeance M65 Software (in this case 2400). This is VERY important.





    IN GAME SETTINGS

    Next, you will need to open the in-game options menu, and raise your sensitivity settings to the maximum.

    1. NEVER lower the in-game sensitivity when playing with a mouse. This will cause a delay with your mouse and give you a "lag" feeling.
    2. Keep your Button Layout set as the DEFAULT configuration.







    Next we need to go into the Advanced tab and match our in-game settings to THIS screenshot below - These settings are VERY important!






    Next, we need to scroll down to the bottom of the Advanced tab and set the Uniform Soldier Aiming to ON.
    Leave the coefficient at its default value (133).






    The final step is to set your Vehicle Sensitivities to your own personal preference. I personally recommend using the maximum value, but any value between 100% - 200% will work fine.






    If your mouse feels too fast or slow, you can adjust the overall sensitivity by using the Max Input Threshold setting in the Advanced tab.
    Any number HIGHER than 85 will lower your sensitivity. Any number LOWER than 85 will raise your sensitivity.








    Feel free to leave comments and feedback below. We'd also love to hear your suggestions if you made any adjustments to these settings.

  2. #2
    SILVER ELITE MASTER

    User Info Menu

    Re: Corsair M65 FPS - Battlefield 1 - XBOX ONE

    can I just suggest that uniform aiming should be set to 178% this is so it lines up with the default of most tv's being 16:9


    http://forum.symthic.com/battlefield...oldier-aiming/

    also you have the dead zone set to 25 in xaim but it's 22 in game.....?

  3. #3
    SILVER ELITE

    User Info Menu

    Re: Corsair M65 FPS - Battlefield 1 - XBOX ONE

    yeah would like to know about that dead zone setting too.

    And is it okay if I change the DPI to 800 (mouse and X-aim)?

  4. #4
    MASTER GUARDIAN ELITE

    User Info Menu

    Re: Corsair M65 FPS - Battlefield 1 - XBOX ONE

    Quote Originally Posted by Incuba3e View Post
    can I just suggest that uniform aiming should be set to 178% this is so it lines up with the default of most tv's being 16:9


    http://forum.symthic.com/battlefield...oldier-aiming/

    also you have the dead zone set to 25 in xaim but it's 22 in game.....?

    I will definitely give the USA aiming a try to see how it feels - it all boils down to personal preference, so whatever feels better for YOU, go for it, there's no wrong answer. These settings are just what I personally came up with and use when I play the game.


    In the Xaim Mouse Settings, the "Deadzone" setting refers to the in-game deadzone. Just how we match our DPI to what our mouse is using on the PC, we need to match our in-game deadzone, but from my personal experience, I've found that having your Xaim Deadzone 1 or 2 digits higher than the in-game number allows for a more responsive aim. - But that all falls back to what feels right for you.


    Quote Originally Posted by virushtk View Post
    yeah would like to know about that dead zone setting too.

    And is it okay if I change the DPI to 800 (mouse and X-aim)?

    You can definitely use 800dpi if you wish. The DPI I use in all of the official mouse settings is the default DPI value of each mouse.

  5. The Following 2 Users Say Thank You to GL0ZZ3N For This Useful Post:


  6. #5
    GOLD NOVA I

    User Info Menu

    Re: Corsair M65 FPS - Battlefield 1

    Thanks for posting.

  7. #6
    SILVER I

    User Info Menu

    Re: Corsair M65 FPS - Battlefield 1 - XBOX ONE

    Quote Originally Posted by Incuba3e View Post
    can I just suggest that uniform aiming should be set to 178% this is so it lines up with the default of most tv's being 16:9


    http://forum.symthic.com/battlefield-quick-questions-and-answers/8504-how-to-set-the-coefficient-for-uniform/ cheapessaywriter
    also you have the dead zone set to 25 in xaim but it's 22 in game.....?
    I agree with the uniform to be set to 178%

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •