Results 1 to 4 of 4

Topic: Drive Hub (SH to HB) how to program

  1. #1
    SILVER I

    User Info Menu

    Drive Hub (SH to HB) how to program

    Hi, so I've spent days browsing through this forum trying to find an answer and was unable. I will give you a quick run down of my gear so we are on the same page.
    Hardware:

    • Drivehub Firmware 2.0.2 (just updated to 2.0.3-beta.40, have not tried yet)
    • PS4 pro
    • Fanatec CSW V2.5 Base (PC / Xbox)
    • Fanatec Elite Wheel (PC / Xbox)
    • Fanatec Inverted V3 pedals
    • Fanatec Shifter
    • Fanatec handbrake V1.5


    Games:
    • Dirt Rally VR
    • Drive Club VR
    • Assetto Corsa


    So everything works fine in all the games except my E-brake. I've tried plugging it in every which way with no luck. The only thing I have found that may be the correct direction is when I start the drive hub up it cycles this message CS25C5250 CUSB-SH, to my understanding that means the accessory port is set up for an external shifter hence the "SH". I have seen there is a way to change some settings or program the drivehub to accept an e brake and the screen would cycle CUSB-HB on start up, then I can plug the hand brake into the clubsport usb adapter and plug that into the accessory port on the drive hub.

    First off will that even work? If it does how the heck do I change the settings to do that?

  2. #2
    Community Boss

    User Info Menu

    Re: Drive Hub (SH to HB) how to program

    Try a standard USB Hub on the accessory port then connect your accessories to the usb hub.

    I use this one myself https://shop.cronusmax.com/cronusmax-usb-hub.html

  3. #3
    SILVER IV

    User Info Menu

    Re: Drive Hub (SH to HB) how to program

    sorry for being annoying but could you please send a like to join discord. I would like to join to your discord .

  4. #4
    SILVER I

    User Info Menu

    Re: Drive Hub (SH to HB) how to program

    Quote Originally Posted by MaxADMIN View Post
    Try a standard USB Hub on the accessory port then connect your accessories to the usb hub.

    I use this one myself https://shop.cronusmax.com/cronusmax-usb-hub.html
    Let me try and be a bit more clear on how everything is hooked up. ill write out a path

    Console ----------------PS4 Pro
    Controller---------------PS4 Controller
    Wheel--------------------Fanatec CSW V2.5 --------- Club Sport Pedals V3 inverted
    Accessory--------------Clubsport USB Adaptor------Club Sport Hand brake V1.5


    so I'm not sure what the hub will do. I really think its a programming issue not a hardware issue as stated in my original post. Is there any insight as to why plugging the USB adapter into a USB hub and then into the accessory port will change anything?

Tags for this Topic

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •