These official mouse tuning guides will show you how to setup your Mice software settings, Cronus Pro X-AIM settings and In-game settings so that they work to perfection - as played by our own team of professionals.

[SIZE=5]Mouse: Cronus PRO then upgrade your CronusMAX PLUS to the latest Firmware

INFO


With the latest X-AIM (v1.11+), you no longer have to disconnect the Xbox One controller (once it has authenticated) before you start to tune your mouse settings. By default the values from the CM Input are now blocked. This is very important - it's so that no values are read from the controller and everything starts from zero. Before this new feature was introduced, many users were tuning their mouse with the controller still connected and wondering why their mouse was sluggish when turning one way and not the other, or only turned left and not right. This was because their analog stick was not sitting at zero and was affecting the mouse output.

This feature cures that. You can also disable the feature so that the controller Input can be read (if you want to use mouse and controller at the same time). Naturally you should do this AFTER you have tuned your mouse.

Simply untick these options in X-AIM:





You first need to get your DPI, Precision Rate, and Mouse Button Layout setup correctly.

Create a profile in the Mad Catz Profiler Software to match the one shown below:

  1. Assign your DPI to 1600
  2. Set the Precision Aim to 50%
  3. Change all of the mouse buttons to match the Programming Screen


PC SOFTWARE SETTINGS






CRONUS PRO (X-AIM) SETTINGS

Create a new X-AIM layout and map your keys like so:
You can of course choose any layout you like, however this is one I recommend for this game. If you have any issues setting up X-AIM, follow these instructions: https://cronusmax.com/forums/showthread.php?t=147133




Configure your mouse settings in X-AIM (Layout options > Mouse Settings)
Match the mouse settings in your layout to look EXACTLY like the image below:

Remember to match your Mouse DPI to the default DPI you set in the Mad Catz profiler Software (in this case 1600). This is VERY important.




IN GAME SETTINGS

The final step is to open the in-game options menu, and raise your sensitivity settings to the maximum.

NOTE: NEVER lower the in-game sensitivity when playing with a mouse. This will cause a delay with your mouse and give you a "lag" feeling.






Feel free to leave comments and feedback below. We'd also love to hear your suggestions if you made any adjustments to these settings.