Results 1 to 12 of 12

Topic: Razer DeathAdder - Battlefield V

  1. #1
    MASTER GUARDIAN ELITE

    User Info Menu

    Razer DeathAdder - Battlefield V

    These official mouse tuning guides will show you how to setup your Mice software settings, Cronus Pro X-AIM settings and In-game settings so that they work to perfection - as played by our own team of professionals.

    [SIZE=5]Mouse: Cronus PRO then upgrade your CronusMAX PLUS to the latest Firmware

    INFO


    With the latest X-AIM (v1.11+), you no longer have to disconnect the PS4 or XB1 controller (once it has authenticated) or have it connected to a USB hub before you start to tune your mouse settings. By default the values from the CM Input are now blocked. This is very important - it's so that no values are read from the controller and everything starts from zero. Before this new feature was introduced, many users were tuning their mouse with the controller still connected and wondering why their mouse was sluggish when turning one way and not the other, or only turned left and not right. This was because their analog stick was not sitting at zero and was affecting the mouse output.

    This feature cures that. You can also disable the feature so that the controller Input can be read (if you want to use mouse and controller at the same time). Naturally you should do this AFTER you have tuned your mouse.

    Simply untick these options in X-AIM:





    You first need to get your DPI, Polling Rate, and Mouse Button Layout setup correctly.

    Create a profile in the Razer Synapse Software to match the one shown below:

    1. Assign your DPI to 1800
    2. Assign your Polling Rate to 500
    3. Change all of the mouse buttons to match the Customize Screen


    PC SOFTWARE SETTINGS






    CRONUS PRO (X-AIM) SETTINGS

    Create a new X-AIM layout and map your keys like so:
    You can of course choose any layout you like, however this is one I recommend for this game. If you have any issues setting up X-AIM, follow these instructions: https://cronusmax.com/forums/showthread.php?t=147133





    Configure your mouse settings in X-AIM (Layout options > Mouse Settings)
    Match the mouse settings in your layout to look EXACTLY like the image below:
    Remember to match your Mouse DPI to the default DPI you set in the Razer Synapse Software (in this case 1800). This is VERY important.





    IN GAME SETTINGS

    Next, you will need to open the in-game options menu, and raise your sensitivity settings to the maximum.

    1. NEVER lower the in-game sensitivity when playing with a mouse. This will cause a delay with your mouse and give you a "lag" feeling.
    2. Keep your Button Layout set as the DEFAULT configuration.







    Next we need to go into the Advanced tab and match our in-game settings to THIS screenshot below - These settings are VERY important!




    The next step is to set your Vehicle Sensitivities to your own personal preference. I personally recommend using the maximum value, but any value between 100% - 200% will work fine.




    The last step is to set out in-game deadzones and adjust our Max Input Threshhold.

    If your mouse feels too fast or slow, you can adjust the overall sensitivity by using the Max Input Threshold setting in the Advanced tab.
    Any number HIGHER than 85 will lower your sensitivity. Any number LOWER than 85 will raise your sensitivity.








    Feel free to leave comments and feedback below. We'd also love to hear your suggestions if you made any adjustments to these settings.

  2. The Following 2 Users Say Thank You to GL0ZZ3N For This Useful Post:


  3. #2
    SILVER IV

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Hi, im only new to the cronusmax scene, but loving it atm
    And these settings are amazing , thanks for your time settings these up.
    I only have 1 small problem with them, I found when im in a plane it takes me ages to turn it around... as in im in the out of bounds area...
    my vehicle settings are at 150% driving cars and tanks ect are fine.. just the flying of the planes
    thanks again for your time and effort

  4. #3
    SILVER IV

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    also im on PS4 using these settings. i couldnt find a ps4 mouse n keyboard area

  5. #4
    SILVER IV

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Any updates for ps4 settings? cannot fly planes with these settings

  6. #5
    MASTER GUARDIAN ELITE

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Quote Originally Posted by ajc87 View Post
    Any updates for ps4 settings? cannot fly planes with these settings
    Flying has always been difficult with a mouse because you have to have your RS constantly held. I'd recommend using keyboard keys mapped to the RS to fly

  7. The Following 2 Users Say Thank You to GL0ZZ3N For This Useful Post:


  8. #6
    SILVER II

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    first of all i want to thank u for the long and perfect explaining ..
    i have 2 issues ...
    1. when i test the dead zone in bf v i found it 13 not 14 .. can u please explain why u chose 14 did this make a differnet?
    2. when i scoop in sniper gun i feel in the long ranges specialy ,alil bet laggy and i feel the mouse not so response with my hand movment specialy when i move my hand too slow for example when im trying to take head shot.. what and how i can fix that?

    again thanks alot.

  9. #7
    MASTER GUARDIAN ELITE

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Quote Originally Posted by alhozayel View Post
    first of all i want to thank u for the long and perfect explaining ..
    i have 2 issues ...
    1. when i test the dead zone in bf v i found it 13 not 14 .. can u please explain why u chose 14 did this make a differnet?
    2. when i scoop in sniper gun i feel in the long ranges specialy ,alil bet laggy and i feel the mouse not so response with my hand movment specialy when i move my hand too slow for example when im trying to take head shot.. what and how i can fix that?

    again thanks alot.

    Setting the xaim deadzone to 13 to match the ingame settings was causing really fine mouse movements to not register in the game. Bumping the xaim deadzone (which is the minimum thumbstick value our mouse will send to the console) up removed the delay. Ive found that It's like this in most games.

    For the sensitivity stuff - doible check that you enabled Uniform Soldier Aim and that your sensitivities for the weapons are set to 100%

  10. #8
    SILVER II

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Quote Originally Posted by GL0ZZ3N View Post
    Setting the xaim deadzone to 13 to match the ingame settings was causing really fine mouse movements to not register in the game. Bumping the xaim deadzone (which is the minimum thumbstick value our mouse will send to the console) up removed the delay. Ive found that It's like this in most games.

    For the sensitivity stuff - doible check that you enabled Uniform Soldier Aim and that your sensitivities for the weapons are set to 100%
    Hi,
    Uniform Soldier Aim - enabled
    Sensitivity - 100%

    Thats my settings when i wrote for you first of all. the same problem

  11. #9
    MASTER GUARDIAN ELITE

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Quote Originally Posted by alhozayel View Post
    Hi,
    Uniform Soldier Aim - enabled
    Sensitivity - 100%

    Thats my settings when i wrote for you first of all. the same problem
    Set your Max Input Threshold to 85 and see how that works for you.

  12. The Following User Says Thank You to GL0ZZ3N For This Useful Post:


  13. #10
    SILVER II

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Im with a small problem, with that setting i fell a little laggy

  14. #11
    SILVER II

    User Info Menu

    Re: Razer DeathAdder - Battlefield V

    Quote Originally Posted by akraje View Post
    Im with a small problem, with that setting i fell a little laggy


    I have the solution bro !!

    down below, next post.......

  15. #12
    SILVER II

    User Info Menu


  16. The Following User Says Thank You to alhozayel For This Useful Post:


Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •