Results 1 to 2 of 2

Topic: Logitech Driving Force Pro Dial adjustment script idea request.

  1. #1
    SILVER III

    User Info Menu

    Logitech Driving Force Pro Dial adjustment script idea request.

    I am using the Logitech Driving Force Pro on my PS4 pro. My idea is to use the turn signals DFGT_L2/DFGT_R2 as my G29_DIAL_CW/G29_DIAL_CCW(dial clockwise/counterclockwise). So i swapped the buttons L2/R2 for my dial. My issue is when i press DFGT_L2/R2 it's if i am just ripping through my dial(ie. TCS -5 --> +5). If it is possible could someone write a script that would make the L2/R2 button press go off/on in milliseconds or perhaps only allow 1 click at a time(ie. -5 -> -4 -> -3 -> etc) it would be greatly appreciated. I am new to this scripting thing so i suck , but here is what i have.


    /* *
    * GPC SCRIPT
    *
    * GPC is a scripting language with C-like syntax.
    * To learn more access GPC Language Reference on Help menu.
    * *********************************************************************************************************************************************************************************************************************************** */

    main {
    //Buttonswap so R2 becomes + and L2 becomes - dial
    swap(DFGT_L2, G29_DIAL_CCW);
    swap(DFGT_R2, G29_DIAL_CW);

    //Reducing sensitivity of Dial Positive input
    while (get_val(DFGT_R2) == 1) {
    combo_run(Dial_Plus)
    break;
    }

    //Reducing sensitivity of Dial Negative input
    while (get_val(DFGT_L2) == 100) {
    combo_run(Dial_Minus)
    break;
    }
    }

    combo Dial_Plus {
    wait(1);
    set_val(DFGT_R2, (get_val(DFGT_R2) * 0));
    // Change this value to tune the dial+ speed when hold pressed the button (ms)
    wait(125);
    }

    combo Dial_Minus {
    wait(1);
    set_val(DFGT_L2, (get_val(DFGT_L2) * 0));
    // Change this value to tune the dial- speed when hold pressed the button (ms)
    wait(125);
    }

  2. #2
    Support Staff

    User Info Menu

    Re: Logitech Driving Force Pro Dial adjustment script idea request.

    Hello, I believe you are having the same issue that was answered here: https://cronusmax.com/forums/showthr...ort-with-a-G27

    As you know, you can plug in any button mapping into the script and should work just like the default buttons the script references.

Posting Permissions

  • You may not post new topics
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •