×
Menu

Call of Duty: Modern Warfare (2019)

 
 

 

Introduction
 
 
GamePack Author(s): Batts & x22DOT
Compatible CronusMAX Firmware: 1.24+
Compatible Controllers: Dualshock 4, Dualshock 3, Xbox One, Xbox 360, Wii U Pro
Compatible Systems: PlayStation 4, Xbox One, and Microsoft Windows
GamePack Support: Click Here
Cronus Discord Channel: Click Here
Toggle Cheat Sheet: Click Here
 
The Call of Duty: Modern Warfare (2019) GamePack features every major FPS Mod in the toolbox, including an exclusive new Dynamic Rapid Fire System that changes speed depending on how hard you pull the trigger. Aim Assist and Anti-Recoil are of course included, both capable of tuning their settings from your controller while playing the game. Other essential options include Rapid Fire, Burst Fire, Drop Shot, Jump Shot, Strafe Shot, Steady Aim, Auto Sprint, and Hair Triggers. All the different default button layouts are also supported, including Bumper/Trigger Swap, Tactical, Lefty, NOM4D, Charlie, Bumper Jumper, Bumper Jumper Tactical, One Hand Gunslinger, Stick and Move, Brawler and Beast. We will not be responsible for all the complaints you're going to get for using this bad boy :)
 
Special thanks to LegitCloudzzz, Itzsnack & Fadexz for their help in the making and testing of this GamePack.
 
We also invite you to join the Cronus Discord Channel - setup and run by members of the Cronus Community. There are several channels dedicated to GamePacks which offer live support and feedback, including direct support from senior members of the Cronus Community. Use this link to join our server: https://discord.gg/mJgQyM4
 
 
 

 

GamePack GCI Options
 
 
All GamePacks have Mods that can be tuned and customized to your preference. This scripting engine is what makes the CronusMAX so powerful and extremely popular with the gaming community. Gaming Mod configuration is now made more accessible than ever before with the new GCI (GamePack Configuration Interface). It pops up as soon as you program the GamePack to your Cronus (Video). Some Mods can be directly enabled/disabled here, and some are disabled in-game by default, but have several available options that can be set here and then enabled or activated while in-game.
 
 
 
 

 

GamePack Setup - Important First Steps
 
 
If you have a CronusMAX PLUS, open the Cronus PRO software and go to Tools > Options > CMax Plus and enable "Mimic Controller Player LEDs" for the backlight LED features to work.
 
 
The majority of these Mods are disabled in-game by default (example: Yellow LED on first load means both Rapid Fire and Burst Fire are disabled, and a quick tap of LT+D-PAD UP will enable Rapid Fire, demonstrated with the LED changing to Pink), so when using this GamePack for the first time, be sure to check each Mod in-game to make sure everything is enabled or disabled precisely the way you want. With the built-in Toggles and LED notifications, this should take only a couple of minutes and will also make you familiar with how to use and configure the GamePack. We have found this eliminates almost all issues that users have using GamePacks on a CronusMAX PLUS.
 
 
 

In-Game Button Layout
Setup Step 1

 
All default Call of Duty: Modern Warfare button layout options are available in this GamePack including Bumper/Trigger Swap. Use the GCI (see below) to select the one you are using, and the GamePack will automatically adjust all the Mods to your preferred choice.
 
This step is critical. If you don't select the correct button layout that you are using in-game, the Mods will not function correctly, especially Anti-Recoil. Use these game provided layouts for optimal GamePack performance.
 
MENU/OPTIONS BUTTON> CONTROLLER
 
Option
Name
0
Default
1
Bumper/Trigger Swap
2
Tactical
3
Lefty
4
NOM4D/Charlie
5
NOM4D/Charlie Tactical
6
NOM4D/Charlie Lefty
7
Bumper Jumper
8
Bumper Jumper Tactical
9
One-Hand Gunslinger
10
Stick and Move
11
Brawler
12
Beast
 

In-Game Stick Layout
Setup Step 2

 
All default Call of Duty: Modern Warfare thumbstick layout options are available in this GamePack. Use the GCI (see below) to select the one you are using, and the GamePack will automatically adjust all the Mods to your preferred choice.
 
This step is critical. If you don't select the correct thumbstick layout that you are using in-game, the Mods will not function correctly, especially Anti-Recoil. Use these game provided layouts for optimal GamePack performance.
 
MENU/OPTIONS BUTTON> CONTROLLER
 
Option
Name
1
Default
2
Southpaw
3
Legacy
4
Legacy Southpaw
5
Southpaw No Click Swap
6
Legacy Southpaw No Click Swap
 
 

 

GamePack Mods - Toggles
 
 
A great feature of GamePacks is that many of the Mods work together and can be enabled at the same time, making them especially potent. However, for maximum effect, some of them need to be quickly enabled/disabled during gameplay, depending on the type of Mod and its features. This requires what we call 'Toggles.'
 
Toggles are designed to give you the ability to instantly change the configuration of certain Mods that require fast access with a simple pre-configured button combo. Some Mods are 'Speed Toggles', and this means they can be enabled/disabled instantly while gaming and some are 'Menu Toggles,' which means you have to access the incredibly useful MOD Menu (see below). From there, you can change the configuration of multiple Mods without complicated button combos. When the MOD Menu is active (flashing blue Cronus LED), all Mods will be suspended to stop any interference with gameplay.
 
Speed Toggles also require a slightly longer press to prevent accidental triggering (only 500ms), and all toggles have rumble feedback and LED notifications. Some Mod options are set in the GCI and then Enabled or Disabled in-game using a toggle.
 
Console
Enter MOD Menu
LED
 
 
 
 
Led: MOD Menu Open = Blink Blue.
Press Toggle again to save settings and exit.
 
 
 

Rapid Fire Mode
Mod 1 - Speed Toggle

 
When Rapid Fire is enabled, you can turn virtually any semi-automatic weapon into a deadly, fully automatic weapon. This creates a very unique advantage for players using semi-automatic weapons and some shotguns too. Rapid Fire is not meant for fully automatic weapons, however it can have positive side effects such as reducing recoil, helping players conserve ammunition and achieve more headshots due to a slower, more controlled fire rate.
 
A new exclusive Mod is Dynamic Rapid Fire where the rate of fire is tied to the amount that the Right Trigger is pulled. When fully pressed the weapon will fire at it's fastest rate.  Barely pulling the trigger can be used to Tap or Burst fire automatic weapons. Includes Anti-ModBlock Technology which prevents game developers from detecting you're using Rapid Fire based Mods - exclusive to Cronus!
 

 

Note
 
 
Rapid Fire can only be enabled when Burst Fire is disabled. For your convenience, whenever the Rapid Fire Speed Toggle is enabled, Burst Fire will be automatically disabled, and vice versa. We've also included useful LED notifications so you can quickly check if Rapid Fire is Enabled, Disabled or if both Rapid Fire and Burst Fire is disabled.
 
Rapid Fire Enabled
Rapid Fire Disabled
Rapid & Burst Fire Disabled
Burst Fire Disabled
Burst Fire Enabled
Both Disabled
 
 
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Speed Toggle during gameplay. Once enabled, the Mod will activate based on your GCI selection.
 
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
 
Select one of the following options for Rapid Fire in the GCI (see images below). Note: These settings can only be applied in the GCI, not in-game, so whatever options you select here will always be the active choice whenever this Mod is in use.
 
Option
Name
Description
1
Mod Disabled
Rapid Fire is disabled (Yellow LED or White LED if Burst Fire is Enabled).
2
Adjustable Rate
Adjustable using MOD Menu Toggles
The rate of fire can be set either in the GCI or by MOD Menu Toggle (see more details below).
3
Dynamic
Rate set by the amount of trigger pull
Dynamic Rapid Fire where the rate of fire is tied to the amount that the Right Trigger is pulled. When fully pressed the weapon will fire at it's fastest rate.  Barely pulling the trigger can be used to Tap or Burst fire automatic weapons.
 
When Option 2 Adjustable Rate is selected, you can set a custom Rapid Fire speed rate in the GCI (see image below), and in-game by using an Adjustable Toggle in the MOD Menu. As always, the fire rate depends on the type of weapon used. Adjustable Range is 1 - 25 Rounds Per Second (Optimum default is 5). Don't forget to share your best settings in the CRONUS COMMUNITY SUPPORT TOPIC for this Mod.
 
How to Adjust Rapid Fire Speed
Adjustable Toggle
-/+

-1

+1

Higher number increases Rate of Fire.
Lower number decreases Rate of Fire.
Press MOD Menu Toggle to exit and test.
 
 
Select one of the following options for how you wish to activate Rapid Fire. Note: These settings can only be applied in the GCI, not in-game, so whatever options you select here will always be the active choice whenever this Mod is in use.
 
Option
Name
Description
1
On Fire
Adjustable
Rapid Fire is enabled anytime the Fire Trigger is pressed (usually RT/R2 unless you have the Bumper/Trigger Layout enabled). It doesn't matter if the Scope (ADS) is being used or not.
2
On ADS and Fire
Adjustable
Rapid Fire is enabled when both the ADS (usually LT/L2) and the Fire Triggers are pressed (usually RT/R2).
 

Burst Fire
Mod 2 - Speed Toggle

 
Burst firing is designed to turn semi-automatic and automatic weapons into full burst firing weapons. When this feature is enabled, your weapon will fire in an optimum number of bursts. Burst firing can help increase precision, reduce recoil and conserve ammunition.
 

 

Note
 
 
Burst Fire can only be enabled when Rapid Fire is disabled. For your convenience, whenever the Burst Fire Speed Toggle is enabled, Rapid Fire will be automatically disabled, and vice versa. We've also included useful LED notifications so you can quickly check if Burst Fire is Enabled, Disabled or if both Burst Fire and Rapid Fire is disabled.
 
Burst Fire Disabled
Burst Fire Enabled
Burst & Rapid Fire Disabled
Rapid Fire Enabled
Rapid Fire Disabled
Both Disabled
 
 
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Speed Toggle during gameplay. Once enabled, the Mod will activate based on your GCI selection.
 
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
 
Select one of the following options for Burst Fire in the GCI (see image below). Note: This setting can only be applied in the GCI, not in-game, so whatever option you select here will always be the active choice whenever this Mod is in use.
 
Option
Name
Description
1
On Fire
Adjustable
Burst Fire is enabled anytime the Fire Trigger is pressed (usually RT/R2 unless you have the Bumper/Trigger Layout enabled). It doesn't matter if the Scope (ADS) is being used or not.
2
On ADS and Fire
Adjustable
Burst Fire is enabled when both the ADS (usually LT/L2) and the Fire Triggers are pressed (usually RT/R2).
 

Anti-Recoil
Mod 3 - Menu Toggle

 
This version of Anti-Recoil no longer relies on the old Anti-Recoil method of 'static' pulldown. It now knows when to stop in every direction (Y and X Axis) to prevent unwanted compensation when aiming up and aiming down. Remember, there isn't a one-size-fits-all setup for Anti-Recoil sensitivity due to different weapons having different perks and attachments affecting weight distribution. We suggest you try different adjustable values with each weapon and set to whatever you feel works best for you.
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Menu Toggle during gameplay. Once enabled, the Mod will activate anytime the Fire Trigger is pulled.
 
Console
Menu Toggle
LED
Led: Mod On = Blink Green, Mod Off = Blink Red.
Press MOD Menu Toggle to save and test.
 
You can also setup a custom Anti-Recoil Power in the GCI (See images below) - this will help fine tune your weapon's recoil weight. Adjustable Range is 1 - 100 (Default 24). Don't forget to share your best settings in the CRONUS COMMUNITY SUPPORT TOPIC for this Mod.
 

 

Tip
 
 
If your weapon is moving UP when you fire, you need a LARGER number in the adjustable parameter.
 
If your weapon is moving DOWN when you fire, you need a SMALLER number in the adjustable parameter.
 
Remember, higher in-game sensitivity = lower Anti-Recoil values. In-Game sensitivity is usually cranked up to the max when using a mouse.
 
 
 
How to Adjust Anti-Recoil Power
Adjustable Toggle
-/+

-1

+1

Lower number decreases weight.
Higher number increases weight.
Press MOD Menu Toggle to exit and test.
 
Select one of the following options for Anti-Recoil in the GCI (see image below). Note: This setting can only be applied in the GCI, not in-game, so whatever option you select here will always be the active choice whenever this Mod is in use.
 
Option
Name
Description
1
Standard
Adjustable
Anti-Recoil is activated while firing (usually RT/R2 unless you have the Bumper/Trigger Layout enabled).
2
Inverted-Y
Adjustable
Anti-Recoil with Inverted-Y Axis is activated while firing (see below).
 
 

 

Important In-Game Setting for Inverted-Y
 
 
This step is critical. 'Invert Vertical Look' setting must be set to 'Enabled' - see image below. Press LT + D-PAD UP to activate in-game (Green LED = On, Red LED = Off).
 
MENU/OPTIONS BUTTON> CONTROLLER
 
 
 

Aim Assist
Mod 4 - Menu Toggle

 
The Aim Assist mod tricks the in-game Aim Assist to always be on by using an exploit that moves the cross-hairs around the actual aim point in a diamond pattern. so when the target is moving it fools the game into thinking you're tracking with the target and it will pull the cross-hairs along with it. For more information on how Aim Assist works, check out this informative article from the Cronus Community. Remember, there isn't a one-size-fits-all setup for Aim Assist due to different weapons having different perks and attachments affecting weight distribution. We suggest you try different adjustable values with each weapon and set to whatever you feel works best for you.
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Menu Toggle during gameplay. Once enabled, the Mod will activate anytime ADS is pulled.
 
Console
Menu Toggle
LED
Led: Mod On = Blink Green, Mod Off = Blink Red.
Press MOD Menu Toggle to save and test.
 
You can also set a custom Aim Assist Strength value in the GCI (See image below) - this will help fine tune your weapon's offset from the original aim point. Adjustable Range is 10 - 100 (Default 24). Don't forget to share your best settings in the CRONUS COMMUNITY SUPPORT TOPIC for this Mod.
 

 

Tip
 
 
The Aim Assist Offset Value is measured from the Aim Point. The larger the value, the bigger the offset. The bigger the offset, the more cross-hair shaking you will experience, but a stronger Aim Assist.
 
 
 
How to Adjust Aim Assist Strength
Adjustable Toggle
-/+

-1

+1

Lower number decreases offset.
Higher number increases offset.
Press MOD Menu Toggle to exit and test.
 

Steady Aim
Mod 5 - Speed Toggle

 
If you are using a scope weapon like a sniper rifle, this mod will make your character take an inhale of breath, and steady your aim by a significant amount.
 
This Mod is disabled by default; however, it can be enabled via a Speed Toggle during gameplay. There is no GCI option required for this Mod. Once enabled, the Mod will activate when you press and hold ADS.
 
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
Hold B/CIRCLE to Activate

Drop/Jump/Strafe Shot Modes
Mod 6 - Speed Toggle

 
Enable the Drop Shot Mod by using the Toggle below. Press Fire (usually RT/R2 unless you have the Bumper/Trigger Layout enabled), and your character will rapidly drop in and out of prone position while firing. This Mod is useful for players that like to maintain stealth while reducing their target profile. It also assists with increased accuracy in combat.
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Speed Toggle during gameplay. Once enabled, the Mod will activate based on your GCI selection.
 
Drop Shot
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
 
Enable the Jump Shot Mod by using the Toggle below. Press Fire usually RT/R2 unless you have the Bumper/Trigger Layout enabled), and you will jump while shooting. This Mod makes you a harder target while confusing the enemy in the process.
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Speed Toggle during gameplay. Once enabled, the Mod will activate based on your GCI selection.
 
Jump Shot
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
 
Enable the Strafe Shot Mod by using the Toggle below. Press Fire usually RT/R2 unless you have the Bumper/Trigger Layout enabled),, and you will strafe sideways while firing your weapon. This Mod makes you a harder target while confusing the enemy in the process.
 
This Mod is disabled in-game by default; however, it can be enabled (or disabled) via a Speed Toggle during gameplay. Once enabled, the Mod will activate based on your GCI selection.
 
Strafe Shot
Console
Speed Toggle
LED
 
 
 
 
Led: Mod On = Blink Green, Mod Off = Blink Red.
 
Set the following options for these Shot Modes in the GCI (see image below). Note: This setting can only be applied in the GCI, not in-game, so whatever option you select here will always be the active choice whenever this Mod is in use.
 
Option
Name
Description
1
On Fire
Select Shot Mode is activated anytime the Fire Trigger is pressed (usually RT/R2 unless you have the Bumper/Trigger Layout enabled). It doesn't matter if the Scope (ADS) is being used or not.
2
On ADS
Select Shot Mode is activated only when the ADS (scope) Trigger is pressed (usually LT/L2).
3
On ADS and Fire
Select Shot Mode is activated when both the ADS (usually LT/L2) and the Fire Triggers are pressed (usually RT/R2).
 

Super Sprint
Mod 7

 
If you are tired of constantly pressing the left analog stick to make your character sprint, or if you can't quite double tap LS fast enough to activate tactical sprint mode, the Super Sprint Mod is just what you need.
 
This Mod is disabled by default; however, it can be changed in the GCI (see image below). There is no Toggle for this option so it cannot be changed during gameplay.
 
Option
Name
Description
1
Mod Disabled
All Super Sprint Mods are disabled.
2
Standard
Your character will automatically sprint if the analog stick is almost fully pressed forward (>95%). The character will walk regular speed if the analog stick is only slightly pressed forward.
3
Tactical Sprint
Your character will automatically sprint in the faster tactical mode if the analog stick is almost fully pressed forward (>95%). The character will walk regular speed if the analog stick is only slightly pressed forward. This Mod causes you to move more quickly than a sprint, but with your weapon pointed up and held in one hand, lengthening the time it takes to aim and engage the gun.
 

Hair Triggers
Mod 8

 
Battlefield applies a "dead-zone" to the trigger buttons, which means the triggers (either shooting or ADS) need to be pressed almost half way down before they are registered by the game. With this Hair Trigger Mod you can ensure your weapon will fire or ADS at the slightest amount of pressure. When using this Mod, the LT/L2 and RT/R2 triggers are digitally converted so that they perform with ultra sensitivity without having to hardwire any extra components to your controller - saving both your warranty, time and money.
 
This Mod is disabled by default; however, it can be enabled in the GCI (see image below). There is no Toggle for this option so it cannot be changed during gameplay.
 
Option
Name
Description
1
Mod Disabled
Hair Triggers are disabled.
2
Mod Enabled
Fire or ADS will now activate at the slightest amount of pressure.
 
 

 

Utility Toggles
 
 
Utility toggles are designed to give you additional control of the GamePack in real-time. A simple tap of a pre-configured button combo and the toggle is instantly activated. All toggles have rumble feedback and LED notifications if enabled.
 
 
 

Global Killswitch
Utility 1 - Speed Toggle

 
Quickly enable or disable the entire GamePack with this convenient killswitch toggle.
 
Console
Speed Toggle
LED
 
 
 
 
 
 
 
 
Led: GamePack On = Pink LED
(White LED if Rapid Fire is disabled)
(Yellow LED if both Rapid & Burst Fire are disabled)
GamePack Off = No LED
 

 

 

Automatic PS4 Crossover
 
 
When this GamePack is being used on a PlayStation 4 and detects the connected controller is not a DualShock 4, it will automatically reassign Touchpad to the Select/Back/View Button and enable a toggle to the PS4 Share Screen.
 
 
 
Crossover Shortcut to DualShock 4 Touchpad:
 
Toggle to PlayStation 4 Share Screen:
 

 

 

Troubleshooting
 
 
If you find your GamePack isn't working correctly, the memory in the Cronus device where the settings are stored may have become corrupted. In this case, we recommend that you erase your memory slots using the Cronus Pro option in Tools > Device Cleanup > Erase Memory Slots. There will be an option to clear the memory slots in Cronus Pro. This step is not necessary, although recommended if you're not using the other slots.
 
 
If you're still having issues and want to check that your Cronus Device is functioning correctly with scripts, but you're not too sure how to test, we recommend you try out the easy to use Cronus Stress Test Script by Cronus Community senior staff member, Lex Lost.
 
 
 

 

Important
 
 
The majority of these Mods are disabled in-game by default (example: Yellow LED on first load means both Rapid Fire and Burst Fire are disabled, and a quick tap of LT+D-PAD UP will enable Rapid Fire, demonstrated with the LED changing to Pink), so when using this GamePack for the first time, be sure to check each Mod in-game to make sure everything is enabled or disabled precisely the way you want. With the built-in Toggles and LED notifications, this should take only a couple of minutes and will also make you familiar with how to use and configure the GamePack. We have found this eliminates almost all issues that users have using GamePacks on a CronusMAX PLUS.
 
 
 
Call of Duty: Modern Warfare (2019) GamePack - Toggle Cheat Sheet
SPEED TOGGLES
(HOLD LT + BUTTON)
 
Rapid Fire Mode
Burst Fire
Steady Aim
Drop Shot
Jump Shot
Strafe Shot
 
Utilities
MOD Menu

PS4 Share Screen
(Crossover Controllers)
Global Kill Switch
 
MENU TOGGLES
(ENTER MOD MENU = LT + MENU/OPTIONS - FLASHING BLUE LED)
 
Anti-Recoil
Aim Assist
 
Adjustable Mods
 
Anti-Recoil -1
Anti-Recoil +1

 
Rate of Fire -1
Rate of Fire +1

 
Aim Assist -1
Aim Assist +1


 
Press LT + MENU/OPTIONS again to save settings and exit MOD Menu.
 
 
Call of Duty® is a registered trademark or trademarks of Activision Publishing, Inc.® in the United States and/or other countries.
The “PS” Family logo is a registered trademark and “PS4” is a trademark of Sony Computer Entertainment Inc.
Microsoft, Xbox One and the Xbox logos are trademarks of the Microsoft group of companies.
Other product names used herein are for identification purposes only and might be trademarks of their respective companies. We disclaim any and all rights to those marks.