×
Menu

Plugin Operation

 
Plugin Operation
1
Capture Options
1. Capture Options
Input field to enter the name of the combo to be generated and check boxes to include the accelerometers and/or the DS4 touchpad data during the capture.
2
Start Capture
2. Start Capture
Clicking on this button will begin a count down of 3 seconds to start the commands capture. The capture buffer has 30 seconds length, the action you want to perform needs to be done within this time. You can press the stop button to interrupt the capture, or just wait the for the memory buffer to completely fill out. The GPC code generation algorithm automatically identifies the beginning and end of the sequence of commands executed in the controller.
 
The CronusMAX PLUS LED display will change to a three bar sign, indicating that the MAX Combo plugin is handling I/O data
 
3
GPC Code
3. GPC Code
 
The results of the GPC code generation algorithm is shown in this area. The code optimization is focused to minimize the code size, but ensuring that all events are reproduced faithfully. If the result displayed is satisfactory, select all the code to copy and paste into your GPC script.
 
4
Status Bar
4. Status Bar
The Status Bar shows information about the buffer usage during the capture operation and about the GPC code generated such as how many transitions detected and commands generated.